1. Skip to content
  2. Skip to main menu
  3. Skip to more DW sites

Inside a recyclable 3D-printed tiny home

January 31, 2024

A 3D-printed house from Maine, United States, made with recyclable material? The makers say it could be a game changer for the climate and the housing crisis.

https://p.dw.com/p/4bnLg
The front porch of a house with a sloping, curved roof
The BioHome is 3D-printed out of sawdust and fully recyclable. It could revolutionize low-cost housingImage: University of Maine ASCC

When Mark Wiesendanger saw a boat almost 8 meters (26 feet) long and weighing over 2,000 kilograms (4,409 pounds) that had been built by a 3D printer at the University of Maine, it sparked an idea: "If they could print a boat, could they possibly print a house?"

As the director of development at MaineHousing, a nonprofit housing finance authority, Wiesendanger helps fund affordable homes in the northeastern US state of Maine.

He says Maine was in the midst of an acute housing shortage, with the state needing around 20,000 rental apartments for low-income households — due in part to a construction slowdown following the Great Recession the late 2000s.

So Wiesendanger decided to contact the person behind the boat-building project about the potential to create low-cost, sustainable houses with a 3D printer.  

Building houses with a 3D-printer

Initially, Habib Dagher, the engineer behind the boat, was concerned about the limitations of the technology for printing 3D homes. Dagher, who is executive director of the Advanced Structures and Composites Center at the University of Maine, knew that producing a "more renewable, more recyclable and more flexible" home would require a new approach. 

Printing a home from sawdust 

It took a few years to figure out what that approach would be. A key factor in reaching what Dagher calls the "ah-ha moment" was that seven pulp and paper mills in Maine had closed. That meant there was an abundance of local wood waste waiting to be used.

He and his team saw an opportunity to transform the waste into a 3D-printable building material, which involved adding a bioplastic binding agent made from corn to the mix to hold the sawdust together.

The next challenge was that the scale of the project demanded the construction of the world's largest 3D polymer printer. It's 60 feet long (18.3 meters), 22 feet wide and 10 feet high. Picture two tracks that run parallel to each other and are about as long as four mid-size cars.

The interior of a 3D-printed home, with bright wood paneling and white furniture
The 3D-printed sawdust home takes shapeImage: University of Maine ASCC

In November 2022, the first prototype of a small 3D-printed house with a living room, bedroom, kitchen and bath was ready. 

The surfaces were created with layered sawdust biomaterial that gives the impression of solid wood. This contrasts with existing printed homes made from concrete, which tend to be boxy and gray.

Taking about three weeks to finish, the so-called BioHome was printed in four modules and reassembled on-site within about half a day.

The prototype survived a year of extreme northern US weather that included -45-degree Fahrenheit (-42.7 degrees Celsius) cold, abundant snow, windstorms and heavy rainfall.  

Meanwhile, the ongoing COVID pandemic exacerbated the housing crisis that the 3D-printed home was designed to address.

A bedroom with bed and side cupboards
Could the one-bedroom 3D,printed BioHome help solve housing shortages?Image: University of Maine ASCC

The 20,000 extra rental apartments that Wiesendanger had earmarked as necessary were now insufficient, as residents from big cities such as New York started migrating to cheaper and more rural areas like Maine.

The state's population of around 1.3 million grew by over 25,000 in two years, exerting further pressure on the inadequate housing stock. Real estate prices increased by at least 30% in many areas.

Wiesendanger soon revised the accommodation needs of the state, calculating that roughly 84,000 housing units for all income levels would be needed by the end of the decade. 

This left the BioHome team with the challenge of quickly scaling up production.  

3D-printed homes meet Kenya's building challenges

Ramping up production capacity

The construction potential of a BioHome already has an advantage over concrete 3D-printed homes because in Maine it is too cold to build with concrete for half of the year.

While the prototype took about three weeks to print at the rate of 20 pounds of material per hour, by the fall of 2023, that number was up to 500 pounds an hour.  

At that rate, and with two printer heads working together, the Composites Center could theoretically print a home within about 48 hours.  

The projected commercial cost for the printed dwelling is about $40,000 (€37,000) since wood meal and bioplastic are relatively cheap.

And unlike normal home construction, 3D printing cuts out much of the labor costs — an advantage amid a shortage in the building sector workers, which is also making it harder to create affordable homes. 

Clay buildings from a 3D printer

The BioHome's construction carbon footprint is also around 30% lower than a traditionally built home, said Dagher. This was an important aspect of the project, as construction accounted for nearly 40% of all energy-related CO2 emissions in 2021, according to the United Nation's Environment Programme (UNEP).

But the project has a few hurdles to clear before it can go into mass production, including testing how the materials respond to different climates. 

Despite the challenges, housing advocate Wiesendanger is inspired by the potential to scale up these composite wood-and-resin 3D-printed homes. 

"I love the fact that it's completely recyclable and doesn't have a huge impact on the environment," he told DW. "It's going to be super insulated and cheap and all that stuff, but at the end of the day, it looks cool."

Listen to our in-depth report on the recyclable 3D-printed tiny home on our Living Planet podcast. 

Edited by: Tamsin Walker 

Stuart Braun | DW Reporter
Stuart Braun Berlin-based journalist with a focus on climate and culture.
Kathleen Schuster headshot at DW
Kathleen Schuster Kathleen Schuster is a freelance producer and host of DW’s environment podcast Living Planet